Rotary Drills

India Mark-II handpump is divided into four main assemblies: Head Assembly:Pump Head Assembly (above ground mechanism) consists of Head with Inspection cover, Third plate, Handle, Water chamber and Stand. Cylinder Assembly:Cast Iron Body painted outside and lined from inside with seamless Brass liner of 63.5mm I.D., Gun-metal valve components and Nitrile rubber components. Discharge capacity is 15 litres @ 40 strokes per min. Connecting Rod:12 mm dia mild steel electrogalvanized, in three metre lengths with hexagonal coupling at both the ends. Riser Pipe (Drop Pipe):32 mm N.B....

Direct Rotary Drilling Rigs Subscribe Drilling Today
Truck Mounted Rotary Drilling Rigs Water Well Drilling Association
Rotary Drilling Rigs for Sale Market Place for Mining,
Drilling, Earth Moving
Equipments
Refurbished Rotary Drilling Rigs Drilling, Mining and Earth
Moving Industry News
Manufacturers And Exporters Rotary Drilling rigs

Drilling Today Market Place for - Water Well Rotary Drilling Rigs, Rotary Drilling Rigs, Direct Rotary Drilling Rigs, Direct Mud Rotary Drilling Rig, Dth Cum Rotary Drilling Rigs, Truck Mounted Rotary Drilling Rigs, Trolley Mounted Rotary Drilling Rigs, Skid Mounted Rotary Drilling Rigs, Hydraulic Rotary Drilling Rigs, Refurbished Rotary Drilling Rigs, Second Hand Rotary Drilling Rigs, Dual Rotary Drilling Rigs, Portable Rotary Drilling Rigs, Tractor Mounted Rotary Drilling Rigs, Mini Rotary Drilling Rigs.

Range of Products Direct Mud Rotary Drilling Rigs

Dth Drilling Rigs
Rotary Drilling Rigs
Combination Drilling Rigs
Dth Cum Rotary Drilling Rigs
Blast Hole Drilling Rigs
Core Drilling Rigs
Wagon Drills
Tractor Mounted Drilling Rigs
Reverce Circulation drilling Rigs
Inwell Drilling Rigs
Trailer Mounted Drill Rig
Self Propelled Skid Mounted Rig
Diamond Core Drilling Rig
Mini Truck Mounted Drilling Rig
Hydro Facturing Equipments
Auto Loader DTH Drilling Rig
Hand Pump Drilling Rigs
Trolley Mounted Drill Rigs
Portable Drilling Rigs
Crawler Mounted Down the Hole
Water Well Drilling Rig
Hydraulic Down the Hole, Drilling Rig
Horizontal Drilling Rigs
Dual Rotary Drilling Rigs
Hydra Drills
Auger Drills
Soil Investigation Drilling Rigs
Foundation Drilling Rigs
Geothermal Drilling Rigs

 
 

Drilling Today Here
Mailing Address:
Drilling Today
House A-145, Shivpuri, Airport Road, Opp. Subodh Girls College, Sanganer, Jaipur 302011 Rajasthan INDIA
Phone: +91 141 2793166
Cell: +91 9414 219 166

Manufacturers Exporters and Suppliers-Mining Drilling Equipments, like Drilling rigs, Water Well Drill Rigs
  Drilling Rigs
  Hammers
  Truck Mounted Drilling Rigs
  Button Bits
  Backhoe Loaders
Versatile 400
  Self Propelled Skid Mounted Rig
  Pick-N-Carry Crane 5T
  Digging/Pole Erection Machine
  KLR Cluster Hammer
  Hand Pumps
  Mineral Water Units
  KLR Generators
  Route Map
 
Hand Pumps
Handpump

India Mark-II handpump is divided into four main assemblies:

Head Assembly:Pump Head Assembly (above ground mechanism) consists of Head with Inspection cover, Third plate, Handle, Water chamber and Stand.

Cylinder Assembly:Cast Iron Body painted outside and lined from inside with seamless Brass liner of 63.5mm I.D., Gun-metal valve components and Nitrile rubber components. Discharge capacity is 15 litres @ 40 strokes per min.

Connecting Rod:12 mm dia mild steel electrogalvanized, in three metre lengths with hexagonal coupling at both the ends.

Riser Pipe (Drop Pipe):32 mm N.B., G.I. medium pipe in three metres length with a socket at one end.

Installation:Simple Installation of India Mark-II handpump, when installed properly, gives very long uninterrupted service. For step by step installation procedure and other details, please refer to our Installation and Maintenance Manual.

India Mark-ii Handpump
Hand Pumps
Suitable for borewell installation with static water level upto 45 mtrs.
The entire above ground components are fabricated out of steel sections, hence they are strong and sturdy.
The Pump Body is hot-dipped galvanized hence corrosion proof.
Handle is designed for ease of operation.
Pre-greased, sealed Ball Bearings add to the ease of operation and elimination of greasing during use.
The Spout design ensures collection of water in any type of vessel normally used.
Pedestal Design ensures the bore hole is sealed to prevent water source contamination.
Cylinder with highly polished brass liner ensures long life of Nitrile Rubber Pump Bucket.
The Rubber parts in the cylinder are nontoxic and hence they cause no health hazards.
All internal parts of the cylinder are made of Gun-metal to ensure long life.
These pumps can be easily adapted for Shallow-Well, Wind Mill and Motorised operations with minor modifications.
India Mark II Pump works on the positive displacement principle, hence the discharge remains constant irrespective of the depth of bore.
AFRIDEV Handpump

AFRIDEV Pump has all the features of VLOM Handpump. AFRIDEV Pump has been designed taking into consideration the maintenance problems faced by the rural/unskilled operators. AFRIDEV Pump can be handled even by woman easily.

Salient Features
Non corrosive below ground components capable of working in corrosive water sources.
UPVC Riser Pipe, Cylinder, Plunger & Foot valves are light weight and inexpensive.
10 mm dia, Three metre long Connecting Rod with forged eye & hook at either sides for interlocking easily, without the use of any tools.
Fulcrum & Rod hanger pins are supported on special grade plastic Bush Bearings, easily replaceable.
Adjustable Handle to suit installations with different bore depths.
Rubber centralisers are provided to each connecting rod to prevent internal damage to uPVC pipes, due to abrassion.
Rubber centralisers are provided to each uPVC pipe to prevent external damage.
 
India Mark III Handpump ump - vlom

VLOM Hand pump is the outcome of extensive R&D based on theVillage Level Operation and Maintenanceconcept, promoted by UNICEF, UNDP, WORLD BANK and other International Donor Agencies. VLOM Pumps can be easily maintained by villagers with minimum Handling /Maintenance skills.

India Mark II cylinder assembly modified to have open-top cap to suit 65 / 50 mm N.B., G I riser pipe.
Upper valve and Lower valve assemblies extractable without  removing riser pipe and cylinder body.
Suitable for setting depths upto 33 Mtrs.
 

   
Send Mail