Getech Industries - Rotary Drilling Rigs, Rotary Drilling Rig, Rotary Drillingrigs, Rotary Drilling, Rotary Rig, Direct Rotary Drilling Rigs, Direct Mud Rotary Drilling Rigs, Rotary Drilling Rigs Manufacturers, Rotary Drilling Rigs Exporters, Rotary Drilling Rigs Suppliers, Rotary Drilling Rigs For Sale

Water Well Drilling Rigs

Truck Mounted Drilling Rigs

DTH
DTH cum Rotary Combination

Tractor Mounted Drilling Rigs

Trailer Mounted Drilling Rigs


DTH drilling rig	DTHR Drills

Tractor Mounted Drill	Trailer Mounted Drills

DTHR / ROTARY DRILL RIG
Brief Technical Specification

DESCRIPTION	MODELS
DESCRIPTION	DTHR 300	DTHR450	DTHR 600
Drilling Capacity: Drill hole size Max. Remaining Size (in steps) Max. Depth Drill rod size	10.0” (254mm) 14.0” (335mm) 984 ft (300 mtrs) 4.5” (114 mm)	10.0” (254mm) 14.0” (335mm) 1475 (450 mtrs) 4.5” (114 mm)	10.0” (254mm) 16.0” (406mm) 1965 ft (600 mtrs) 4.5” (114 mm)
	(Under Favourable Drilling Condition)
Mast: Construction Centraliser opening R.H Travel	Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs)	Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs)	Sturdy Box Type 18.0” (457mm) 23 ft (7 mtrs)
Rotary Head: Max. Speed Max. Torque	0 to 120 rpm 434 Kgf	0 to 120 rpm 475 Kgf	0 to 120 rpm 519 Kgf
Feed System: Pull Up Force (Max.) Pull Down Force (Max.) Rapid speed (up)	11285 Kgf 5525 Kgf 40 m/min	16085 Kgf 8480 Kgf 30 m/min	21990 Kgf 11215 Kgf 24 m/min
Hydraulic System: Max. Operating Pressure Filtration (Nom) Return Tank Capacity	220 bar 10 microns 750 ltrs	240 bar 10 microns 800 ltrs	210 bar 10 microns 800 ltrs
Prime Mover: Input Drive	Driven by suitable Diesel engine	Driven by suitable Diesel engine	Driven by suitable Diesel engine
Levelling Jacks: Cylinder Stroke	4 No.s Ø 125mm X 610mm	4 No.s Ø 125mm X 610mm	4 No.s Ø 125mm X 610mm
Levelling Jacks: Cylinder Stroke	(System Consists of Reverse Flow Resricted Valves)
Break Out Wrench: Actuation Type Cylinder Stroke	Hydraulic 300 mm	Hydraulic 300 mm	Hydraulic 300 mm
Mud Pump: Bore Stroke Max. Flow Max. Pressure Drive	152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic	152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic	152 mm 200 mm 1361 LPM 20.75 Kg/cm² Hydraulic
Options: Oil Cooler Type Water Injection Pump Flow Max. Presssure Type of Drive	Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic	Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic	Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 55 Lpm 42 Kg/Cm² Hycraulic

Compressor/Rod changer/Hoist/Water pump with drive are offered as the per the requirement of the customer technical specifications
Getech Industries Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly

(In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

DTH DRILL RIGS
Technical Specifications

Description	Models
Description	DTH 1000	DTH 1500	DTH2000
Drilling Capacity: Drill hole size Max. Depth Drill Rod Size	6.0” – 8.0” (152mm – 203mm) 1000ft (305mtrs) 4.5” (114mm)	6.5” – 8.0” (168mm – 203mm) 1500ft (457mtrs) 4.5” (114mm)	6.0” – 10.0” (152mm – 254mm) 2000ft (610mtrs) 4.5” (114mm)
	(Under favourable drilling conditions)
Mast: Construction Centraliser opening Rod/Casing handling	Sturdy channel 270 mm 6.0 mtrs.	Sturdy channel 270 mm 6.0 mtrs.	Sturdy channel 305 mm 6.0 mtrs.
Rotary Head: Max. Speed Max. Torque	0 to 100 rpm 245 kgf	0 to 100 rpm 245 kgf	0 to 100 rpm 490 kgf
Feed System: Pull up Force Pull down Force Pull up speed	8590 kgf 5890 kgf 42 m/min	14070 kgf 7420 kgf 30 m/min	20940 kgf 10680 kgf 20 m/min
Hydraulic System: Pump Reservoir capacity Operating Pressure	Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi)	Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi)	Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi)
Levelling Jacks: Quantity Bore X Stroke Length	4 Nos. 100mm X 610mm	4 Nos. 125mm X 610mm-2 100mm X 610mm-2	4 Nos. 125mm X 610mm
Air Line Lubricator: Type Max. Pressure	Venture Type 450 psi	Venture Type 450 psi	Venture Type 450 psi
Options: a) Rod Changer b) Oil cooler Type c) Welding Generator d) Water Injection pump Flow Max. Pressure	Manual operated Rod changer Hydraulic Driven Fin type oil to air Hydraulic Driven 36 LPM 425 psi		Manual operated Rod Changer & Jib Hoist Hydraulic Driven Fin type oil to air Hydraulic Driven 55 LPM 600 psi

Getech DTHR 600 DTH Cum ROTARY DRILL RIG DTHR – 600

Technical Specifications

DTH Drilling To Hole Diameter: 203 mm (8”inches) and Maximum depth: 600 meters, Rotary Drilling to Hole Diameter: 311 mm (12¼”), Maximum Remaining Diameter: 407 mm (16”) and Maximum Depth: 600 meters. 6 X 4 Carrier Truck Minimum. Load capacity of 25 Tonnes
Prime Mover engine capacity: 260HP @ 2200 RPM
Mast Overall Length: 9000mm
Feed System has Pull Back: 22500Kgf and Pull Down: 11000Kgf
Rotary Head Assembly torque upto 600 Kg-m
Stabilizer Cylinder bore Dia of 125mm Break out Winch has Cylinder bore Dia: 80mm and Stroke: 300mm.
Mud Pump Max Flow of 1685 Liter/min
Air Compressor to 1350 Cfm/350 PSI

MINI CRAWLER MOUNTED HYDRAULIC RIGS

GETECH Hydraulically operated multi purpose Mini crawler Mounted Rigs are specially designed for fast & cost effective drilling by air, mud or foam drilling methods using down-the-hole hammers & bits, core barred and tools, rotary tricone bits and other conventional tools as per customer’s choice, Hydraulic system powered by Deck engine is operated by fixed displacement pump with proportional valve, which regulates track motors, rotary head speed, feed etc., Centralized control panel located close to the drilling point ensures convenience of operation, Getech Rigs require minimum maintenance and easy to operate.

Technical Data

Description	Core Drilling Application KMC - 10	DTH Drilling Application KMC - 10
Capacity: Drill hole Dia.(CORE/DTH) Drill Depth Over Burden Drill Dia. Over Burden Drill Depth	NW / NQ 500 Feet. ----- ----- Under Favorabnle drilling conditions	4.5” 500 Feet. 6.5” 150 Feet. Under Favorabnle drilling conditions
Hydraulic System: A)Prime Mover B) Feed Pull up Force. Pull Down Force. Pull Down Speed. Pull up Speed C) Rotation Speed Torque Speed. Torque.	Deck Engine 942 HP @ 1500 rpm) 4700 Kgf. 2400 Kgf. 30 m/min. 24 m/min. 0-80 rpm (Low mode) 203 Kgf-m and 0-410 rpm (High mode) 41 Kgf-m	Deck Engine 942 HP @ 1500 rpm) 4700 Kgf. 2400 Kgf. 30 m/min. 24 m/min. 0-80 rpm (Low mode) 203 Kgf-m ------------ ------------
Compressor Minimum Suggested	----------------------------	540 CFM & 185 PSI
Under Carriage	Maximum Speed 2 kmph Grouser Type Single/Triple Wheel Base 1650 mm Grouser width 254/310 mm Ground pressure 0.78 kgf/sq.cm Type of Drive Independent Hydraulic Motor For each Track No. of Rollers. 5 on each track	Maximum Speed 2 kmph Grouser Type Single/Triple Wheel Base 1650 mm Grouser width 254/310 mm Ground pressure 0.78 kgf/sq.cm Type of Drive Independent Hydraulic Motor For each Track No. of Rollers. 5 on each track
Water Pump Capacity Suggested min Drive & Mounting	50 LPM @ 35 Kgf/cm²	36 LPM @ 28 Kgf/cm² Hydraulic
Hoist:	1 Ton @ 30 meters / minute	-----------------------

GETECH Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly.

(In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

Getech – 1000 SP Drilling Rig

Maximum Drill hole Diameter – 20” and
Maximum depth – 10 ft. And 6” – 12” upto a depth of 1000ft
Mast Length – 8800 mm
Rotary head speed 0 – 65 R.Pm. Rotary head Torque 0 – 900 Kg-m
Feed system pull up – 11,200 Kgs
Feed system pull down – 5500 Kgs
Engine – 260 HP @ 2200 R.Pm
Fitted with mobile Crane
Fitted with 1150/300 IR. Compressor